Insights · as of 26 October 2026

CRA: Status of the Harmonised Standards (as of 26 October 2026)

Not a single harmonised standard for the Cyber Resilience Act has been cited in the Official Journal of the EU so far. The horizontal standards EN 40000-1-1 and -1-2 are close to ratification; the vulnerability handling standard prEN 40000-1-3 and 17 ETSI product standards are in the pipeline. This article summarises what is in progress, when to expect what, and what manufacturers should do in the meantime.

Last reviewed 26 October 2026Reviewed by David Kleinz, CISSPReading time 8 min
In short

As of 26 October 2026 no harmonised standard for the CRA has been cited in the Official Journal of the EU. The horizontal standards EN 40000-1-1 and 40000-1-2 are close to ratification, prEN 40000-1-3 (vulnerability handling) and 17 ETSI product standards are in the pipeline; citation is not expected before 2027. Until then manufacturers should use IEC 62443-4-1/4-2, ETSI EN 303 645 and BSI TR-03183 as bridges.

Why harmonised standards are decisive for the CRA

The Cyber Resilience Act (Regulation (EU) 2024/2847) deliberately phrases its security requirements in Annex I in abstract terms: "secure by default", "no known exploitable vulnerabilities", "minimising the attack surface". How a manufacturer demonstrates this in practice is meant to be defined by harmonised standards. Under Article 27 CRA, products that conform to a harmonised standard cited in the Official Journal of the EU benefit from the presumption of conformity: market surveillance authorities must assume that the requirements covered are met. Without a standard, the manufacturer has to justify every requirement individually.

Important products in Class I under Annex III may only be assessed by self-assessment (Module A) if the manufacturer applies harmonised standards or common specifications in full (Article 32(2)). Otherwise a notified body is required. Which standards are cited, and when, therefore decides for many manufacturers whether they may self-declare by 11 December 2027 or must plan for an external assessment (more on product classes).

As of 26 October 2026: no harmonised standard for the CRA has been cited in the Official Journal of the EU. The Commission's list contains no entry for Regulation (EU) 2024/2847. None of the standards listed below currently creates a presumption of conformity.

The standardisation request M/606 and its deadlines

The basis is the standardisation request M/606 (Implementing Decision C(2025) 618 of 3 February 2025), which the Commission issued to CEN, CENELEC and ETSI. According to the Commission, it covers 41 standards: horizontal standards (Type A: principles and risk management; Type B: vulnerability handling and general security requirements) and vertical product standards (Type C) for all product categories in Annexes III and IV. The lead is the joint technical committee CEN-CENELEC JTC 13 "Cybersecurity and Data Protection"; ETSI TC CYBER is handling the product standards for IT and consumer products, CENELEC the OT profiles, and CLC/TC 47X the chip standards.

The original deadlines for delivering the drafts to the Commission were: 30 August 2026 for the horizontal standards and vulnerability handling, 30 October 2026 for the product standards, and 30 October 2027 for the general security requirements. The first deadline passed without any standard being delivered. In July 2026 the Commission notified a draft amendment to the request that pushes the deadlines back by around two months: horizontal standards and vulnerability handling to 30 October 2026, product standards to 31 December 2026. According to several observers (as of 17 October 2026), this amending decision has not yet been adopted; the Commission's CRA standardisation page still refers only to C(2025) 618 (last updated 31 July 2026). The new dates should therefore be read as "expected".

The postponement affects only the standardisation deadlines. The CRA application dates remain unchanged: reporting obligations since 11 September 2026, all other obligations from 11 December 2027 (full CRA timeline).

Status table: standards for the CRA (as of 26 October 2026)

The table summarises the procedural stages known to us. Stages at CEN-CENELEC: drafting, enquiry (public consultation), formal vote, ratification (publication as EN), citation in the Official Journal. All dates come from the sources listed and have not been confirmed by the Commission.

StandardSubjectStatusExpectedSource
EN 40000-1-1Vocabulary (horizontal)Formal vote passed, ratification scheduledRatification 2 November 2026; no Official Journal citation plannedCEN-CENELEC database as reported by IBF Solutions and CRA Evidence
EN 40000-1-2Principles of cyber resilience, product risk management, lifecycle (Type A)Formal vote passed, ratification scheduledRatification 2 November 2026; no Official Journal citation plannedCEN-CENELEC database as reported by IBF Solutions and CRA Evidence
prEN 40000-1-3Vulnerability handling (Type B, Annex I Part II)Enquiry completed (according to observers in March 2026), formal vote pendingDelivery to the Commission expected 30 October 2026 (draft M/606 amendment); Official Journal citation expected, date openCRA Evidence, IBF Solutions, cyber-regulierung.de
prEN 40000-1-4General security requirements (Type B, Annex I Part I)Under developmentDelivery to the Commission 30 October 2027CEN-CENELEC workshop April 2025, CRA Evidence
prEN 40000-10Identity and access management, authentication (Class I)Enquiry completedDelivery expected 31 December 2026CRA Evidence
prEN 40000-11Hardware devices with security boxes (critical products)Enquiry completedDelivery expected 31 December 2026CRA Evidence
prEN 40001-3, 40002-3, 40003-3Microprocessors and microcontrollers with security functions, tamper-resistant chips, smart card platformsEnquiry completedDelivery expected 31 December 2026CRA Evidence
prEN 40004-3ASICs and FPGAs with security functions (Class I)Enquiry since 25 September 2026Delivery expected 31 December 2026CRA Evidence
prEN 18330Smart cards and secure elements, application level (critical)Enquiry completedDelivery expected 31 December 2026CRA Evidence
ETSI EN 304 617 to 304 627, 304 631 to 304 63617 product standards for IT and consumer products: browsers, password managers, antivirus, VPN, network management, SIEM, boot managers, PKI software, network interfaces, operating systems, routers/modems/switches, smart home assistants, smart home security products, connected toys, wearables, hypervisors, firewalls/IDS/IPSETSI approval procedure (since 13 August 2026)Procedure closes per standard between mid-September and mid-November 2026; delivery expected 31 December 2026ETSI announcement of 13 August 2026 as reported by cyberresilienceact.eu and Standards Drift
prEN 50770-1 to -6OT profiles: firewalls/IDS/IPS, network management, network interfaces, VPN, routers/switches, SIEM for industrial environments (based on IEC 62443)Under development (draft)Delivery expected 31 December 2026; observers consider the deadline uncertainCRA Evidence, IBF Solutions
Not yet assignedSmart meter gateways (critical)Under development, no number assignedOpenCRA Evidence

Two points stand out. First: the two standards that will be ratified first, EN 40000-1-1 and -1-2, are not intended for citation in the Official Journal according to the CEN-CENELEC database. They provide vocabulary and methodology, but no presumption of conformity. Second: the horizontal standard that matters most to manufacturers, prEN 40000-1-3 on vulnerability handling, has completed the enquiry but not yet the formal vote. After that come the Commission's assessment and the citation decision. In our view, a citation before mid-2027 would be optimistic; nobody has given reliable dates so far.

What manufacturers should do now without harmonised standards

Waiting for the standards is not an option: the obligations under Article 13 and Annex I apply from 11 December 2027 regardless of whether a standard is cited. Without a presumption of conformity, you must show in the technical documentation under Annex VII how each requirement is met. There are proven bridges for this that are closely aligned with the future EN standards in substance:

  • IEC 62443-4-1 and 4-2: secure development lifecycle and component requirements. The OT product standards prEN 50770 build on them; the requirements in Annex I Part I can largely be mapped to 4-2, Part II to 4-1 (IEC 62443 overview).
  • ETSI EN 303 645: baseline security requirements for consumer IoT. Many ETSI product standards in the EN 304 6xx series adopt its structure.
  • ISO/IEC 27034: application security as a process framework for software vendors, in particular for anchoring security requirements in development and operations.
  • BSI TR-03183: Part 1 (general requirements) translates Annex I into testable requirements, Part 2 defines the SBOM format, Part 3 the vulnerability reporting. BSI, the German Federal Office for Information Security, published the guideline explicitly as practical support for the CRA.

Document the mapping in a mapping table: requirement from Annex I, standard and clause applied, evidence in the product or process. If a harmonised standard is cited later, the transition is a delta review, not a restart. For Class I products you should contact a notified body in parallel; notification has been under way since 11 June 2026, and capacity will become scarce in 2027. The requirements in Annex I are explained under CRA requirements.

Outlook

For the fourth quarter of 2026 we expect: the ratification of EN 40000-1-1 and -1-2 (scheduled for 2 November 2026), the close of the ETSI vote on the 17 product standards (by mid-November 2026) and, provided the Commission adopts the amending decision, the delivery of prEN 40000-1-3 by the end of October or in the months that follow. We consider the first Official Journal citations realistic in 2027 at the earliest, possibly only close to the application date of 11 December 2027. Should standards still be missing by then, the Commission can adopt common specifications by implementing act under Article 28 CRA.

Manufacturers should therefore not base their planning on the presumption of conformity, but on technical documentation that stands on its own. Those who work to IEC 62443-4-1/4-2 or TR-03183 today will most likely only need to fine-tune when the EN standards appear.

This article is kept up to date. We update the status table as soon as ratifications, the amending decision on M/606 or Official Journal citations become available. The date of the last review is shown at the top of the page.

Next steps

If you want to know which product class applies to your product and which bridging standards make sense for your documentation, we support you as part of our CRA consulting with a gap analysis and a mapping table against Annex I. The CRA overview is the starting point; you can arrange an initial consultation via the contact form.

Frequently asked questions

Can I already rely on a harmonised standard for the CRA today?

No. The presumption of conformity under Article 27 CRA requires that the reference of the standard has been published in the Official Journal of the EU. As of 26 October 2026, this is not the case for any CRA standard. Drafts (prEN) and ratified but uncited standards (EN) do not create a presumption.

What does this mean for Class I products?

Important products in Class I under Annex III may only be assessed by self-assessment (Module A) if harmonised standards or common specifications are applied in full. As long as no standard is cited, the route for these products effectively runs through a notified body (Module B+C or H under Article 32), unless a citation is published before 11 December 2027.

Is certification to IEC 62443-4-1/4-2 sufficient for the CRA?

It does not create a presumption of conformity, because IEC 62443 is not intended as a harmonised standard for the CRA. It is, however, a strong building block of evidence for the technical documentation under Annex VII, because it covers a large share of the requirements in Annex I. According to CEN-CENELEC, the OT product standards prEN 50770 build on IEC 62443.

Cite as: Blue Panther GmbH (David Kleinz): “CRA: Status of the Harmonised Standards (as of 26 October 2026)”, panther.blue, as of 26 October 2026, https://panther.blue/en/insights/cra-harmonised-standards-status/

Sources and references

  1. Regulation (EU) 2024/2847 (CRA), Articles 27 and 32, EUR-Lex
  2. European Commission: Cyber Resilience Act – Standardisation (M/606, C(2025) 618), as of 31 July 2026
  3. European Commission: Cyber Resilience Act (overview, guidelines of 27 July 2026)
  4. CEN-CENELEC: Workshop Cyber Resilience Act and the horizontal standards (April 2025)
  5. CRA Evidence: Harmonised standards status tracker, as of 17 October 2026
  6. IBF Solutions: Status quo of standardisation for the Cyber Resilience Act (in German), as of 6 October 2026
  7. cyberresilienceact.eu: Draft amendment to the M/606 standardisation deadlines (30 July 2026, updated 11 September 2026)
  8. cyberresilienceact.eu: ETSI publishes 17 CRA product standards for public enquiry (13 August 2026)
  9. Standards Drift: The first CRA harmonised standards deadline has passed (30 August 2026)
  10. cyber-regulierung.de: EN 40000 – Harmonised standards for the Cyber Resilience Act (in German)
  11. BSI, the German Federal Office for Information Security: Technical Guideline TR-03183 Cyber Resilience Requirements for Manufacturers and Products
  12. ETSI EN 303 645: Cyber Security for Consumer Internet of Things
David Kleinz
David Kleinz
Founder and Managing Director, Blue Panther GmbH · CISSP · ISO/IEC 27001 Lead Auditor
Author profile →

Let's talk about your project.

A first assessment within days, without obligation and in confidence. Consulting in English and German.

Get in touch