---
title: "CRA Product Classes: Important Class I, II and Critical"
description: "CRA product classes explained: which products are important (class I, II) or critical, which module applies and when a notified body is required."
url: https://panther.blue/en/cra/product-classes/
lang: en
date_modified: 2026-10-26
author: David Kleinz (Blue Panther GmbH)
alternate: https://panther.blue/cra/produktklassen/
---

# CRA Product Classes: Default, Important (Class I and II) and Critical Compared

_As of: 26 October 2026 · Author: David Kleinz, CISSP, ISO/IEC 27001 Lead Auditor · https://panther.blue/en/cra/product-classes/_

**In short:** The CRA has four tiers: default products (self-assessment, module A), important products class I (self-assessment only with harmonised standards, otherwise a notified body), class II (always a notified body, module B+C or H) and critical products under Annex IV (European certification once mandated). Classification follows Annex III and IV.

The Cyber Resilience Act divides products with digital elements into four groups: default products, important products of class I and class II (Annex III) and critical products (Annex IV). The classification determines whether you may declare conformity yourself or need a notified body. This page lists all product categories, explains conformity assessment modules A, B+C and H and shows the route until harmonised standards are available.

## Four tiers, one principle

The [Cyber Resilience Act](https://panther.blue/en/cra/) (Regulation (EU) 2024/2847) places the same essential requirements from Annex I on every product with digital elements. What differs is how conformity is demonstrated. The greater the potential damage of a product category, the stricter the conformity assessment under Art. 32. The CRA has four tiers for this:

| Tier | Legal basis | Conformity assessment |
|---|---|---|
| Default product | All products not listed in Annex III or IV | Self-assessment (module A) |
| Important product, class I | Annex III class I | Self-assessment only with full application of harmonised standards, common specifications or a certification scheme; otherwise module B+C or H with a notified body |
| Important product, class II | Annex III class II | Always a notified body (module B+C or H) or European certification |
| Critical product | Annex IV | European cybersecurity certification under the CSA as soon as a delegated act requires it; until then as class II |

The decisive factor is the product's core functionality. A device belongs to a category in Annex III if it has the function named there as an essential characteristic, not if it merely contains it incidentally. A machine tool with a built-in switch does not become a switch. In 2026, the Commission published guidelines on the scope that underpin this distinction with examples.

## Default products: the large majority

Around 90 % of all products with digital elements are default products, according to the Commission's estimate when it presented the Regulation. These include machine controllers without a dedicated security function, industrial sensors, drives with fieldbus, HMI panels, household appliances with app connectivity, printers, most application software products and cloud remote data processing solutions that form part of the product. The manufacturer carries out the conformity assessment internally (module A under Annex VIII Part I), issues the EU declaration of conformity and affixes the CE marking. No external body is involved.

"Self-assessment" does not mean "fewer requirements". All obligations under Art. 13 and Annex I apply in full, and market surveillance can request the technical documentation at any time. What is missing is only the external review before placing on the market. In return, the manufacturer carries the full risk if its classification or its assessment does not hold up.

## Important products: class I and class II

Annex III lists product categories whose compromise has particularly far-reaching consequences: because they provide security functions for other systems, because they are deployed in networks in large numbers, or because they have access to sensitive data. The lists are exhaustive; the Commission can amend them by delegated act.

### Class I

| Category (Annex III class I) | Typical products |
|---|---|
| Identity management and privileged access management | IAM software, PAM solutions, authentication and access readers |
| Browsers | Standalone and embedded browsers |
| Password managers | Desktop, mobile and enterprise password managers |
| Software that searches for, removes or quarantines malicious software | Antivirus and anti-malware products |
| Products with VPN functionality | VPN clients, VPN gateways, devices with integrated VPN |
| Network management systems | NMS, network monitoring with configuration access |
| Security information and event management | SIEM systems |
| Boot managers | Bootloaders, UEFI boot managers |
| PKI software and issuance of digital certificates | Certificate authority software, certificate management |
| Physical and virtual network interfaces | Network cards, virtual NICs, industrial Ethernet modules |
| Operating systems | Desktop, server, embedded and real-time operating systems |
| Routers, modems for internet connection and switches | Industrial routers, DSL and cellular modems, managed and unmanaged switches |
| Microprocessors with security-related functionalities | Processors with secure boot, trusted execution environment |
| Microcontrollers with security-related functionalities | MCUs with crypto accelerator, secure key storage |
| ASICs and FPGAs with security-related functionalities | Crypto ASICs, FPGAs with bitstream encryption |
| Smart home general purpose virtual assistants | Voice assistants, smart speakers |
| Smart home products with security functionalities | Smart door locks, cameras, baby monitors, alarm systems |
| Internet-connected toys | Toys with social interaction features or location tracking |
| Wearables | Health trackers without medical device status, wearables for children |

### Class II

| Category (Annex III class II) | Typical products |
|---|---|
| Hypervisors and container runtime systems | Virtualisation platforms, container runtimes, including in edge devices |
| Firewalls, intrusion detection and intrusion prevention systems | Network firewalls, industrial firewalls, IDS/IPS appliances and software |
| Tamper-resistant microprocessors | Processors with physical tamper protection |
| Tamper-resistant microcontrollers | Secure MCUs with tamper detection |

For automation, the list is more relevant than it appears at first glance. Many industrial components today contain a switch, VPN access for remote maintenance or a microcontroller with secure boot. Whether that makes the device an important product depends on whether this function is its core functionality. A decision with reasoning belongs in the technical documentation.

## Critical products under Annex IV

Annex IV contains three categories in which the Commission sees a particularly high risk for supply chains and critical infrastructures:

| Category (Annex IV) | Typical products |
|---|---|
| Hardware devices with security boxes | Hardware security modules (HSM), devices with a physically protected cryptographic area |
| Smart meter gateways and devices for advanced security purposes | Smart meter gateways in smart metering systems, secure cryptoprocessors |
| Smartcards and similar devices including secure elements | Chip cards, eSIM modules, secure elements in end devices |

For critical products, the Commission can require by delegated act that a European cybersecurity certificate under the Cybersecurity Act (CSA) is mandatory. As long as no such act exists, the same rules apply as for class II: conformity assessment with a notified body.

## Decision tree: which class does your product fall into?

- **Is it a product with digital elements?** Software or hardware whose intended purpose includes a direct or indirect data connection (Art. 3(1)). If not: the CRA does not apply.

- **Does an exclusion under Art. 2 apply?** Medical devices, type-approved motor vehicles, aviation, marine equipment, products for national security, non-commercial open-source software. If yes: the CRA does not apply or applies only to a limited extent.

- **Is the core functionality listed in Annex IV?** If yes: critical product. Until the delegated act, module B+C or H with a notified body.

- **Is the core functionality listed in Annex III class II?** If yes: important product class II. Module B+C or H with a notified body, alternatively a CSA certificate.

- **Is the core functionality listed in Annex III class I?** If yes: important product class I. Do you apply a harmonised standard in full? Then module A. If not: module B+C or H with a notified body.

- **Otherwise:** default product. Module A, internal control.

The [CRA applicability check](https://panther.blue/en/cra/applicability-check/) walks you through exactly these questions in a few minutes and delivers an initial classification with the matching conformity route.

## Conformity assessment modules A, B+C and H

Annex VIII describes the procedures. They correspond to the modules of the New Legislative Framework that manufacturers know from the Machinery Regulation, the Radio Equipment Directive or the Low Voltage Directive. What is new is only the subject of the assessment: cybersecurity across the entire lifecycle, not just the state at delivery.

| Module | What is assessed | Who assesses | Suitable for |
|---|---|---|---|
| A: Internal control (Annex VIII Part I) | The manufacturer verifies itself whether product and processes meet Annex I, prepares the technical documentation under Annex VII and issues the EU declaration of conformity. | Manufacturer | Default products; class I with full application of standards |
| B+C: EU-type examination and conformity to type (Annex VIII Parts II and III) | A notified body examines the technical documentation, the design and the vulnerability handling processes and issues an EU-type examination certificate. The manufacturer ensures in series production that units conform to the examined type. | Notified body (B), manufacturer (C) | Individual products or product families with a stable architecture |
| H: Full quality assurance (Annex VIII Part IV) | A notified body assesses and monitors the manufacturer's quality assurance system for design, development, production and testing. Products from this system are deemed to conform. | Notified body | Manufacturers with a broad portfolio and a mature secure development lifecycle, for instance under IEC 62443-4-1 |

For manufacturers with many variants and short release cycles, module H is often the more economical route, because not every type has to be examined again. The prerequisite is a documented, auditable development process. Anyone already certified to [IEC 62443-4-1](https://panther.blue/en/iec-62443/) has a large part of this foundation in place.

## Notified bodies and the transition until standards are available

### Role of notified bodies

Notified bodies are conformity assessment bodies that a Member State has notified to the Commission under Chapter IV (Art. 35 to 51). They must be independent, competent and accredited; the notification is published in the Commission's NANDO database. Chapter IV has applied since 11 June 2026, and the first notifications for the CRA are under way. Experience suggests that bodies already assessing under the Radio Equipment Directive or for Common Criteria will become active first. Expect waiting times of several months and assessment durations that depend on the quality of your documentation.

### Transition until harmonised standards are available

As of 26 October 2026, no harmonised standard for the CRA has been cited in the Official Journal of the EU. This has a concrete consequence for class I: the exception in Art. 32(2), which permits self-assessment where standards are fully applied, currently has no effect. Manufacturers of routers, operating systems, VPN products or microcontrollers with security functions must plan with a notified body for the time being, or rely on the vertical standards of the ETSI EN 304 6xx series and the horizontal standards EN 40000-1-3 and 40000-1-4 being cited in time before 11 December 2027. That is possible, but not certain. A module B+C assessment started today is the more reliable route. We maintain the current status of standards at [Harmonised CRA standards](https://panther.blue/en/insights/cra-harmonised-standards-status/) and in the [CRA timeline](https://panther.blue/en/cra/timeline/).

> Even without a presumption of conformity, standards remain useful. IEC 62443-4-1 and 4-2, ETSI EN 303 645 for consumer IoT and BSI TR-03183 provide recognised evidence structures that notified bodies accept and that will later feed into the harmonised standards.

## Next steps

Classify every product in your portfolio and record the reasoning in writing; the [applicability check](https://panther.blue/en/cra/applicability-check/) gives you an initial assessment for this. Then check which [requirements from Annex I](https://panther.blue/en/cra/requirements/) apply to your products. In our [CRA consulting](https://panther.blue/en/cra/consulting/), we clarify borderline cases, select the appropriate conformity assessment module and prepare the documentation so that a notified body can assess it without requests for additional information.

## Frequently asked questions

**Which products are default products under the CRA?**

All products with digital elements that are listed in neither Annex III nor Annex IV. That is the large majority: machine controllers, industrial sensors, HMI panels, household appliances with an app, most software products. For them, self-assessment under module A is sufficient.

**Is my PLC or my industrial router an important product?**

A PLC without its own security function is usually a default product. Routers, modems and switches are listed in Annex III class I, so an industrial router falls under it. Firewalls and intrusion detection systems belong to class II. Microcontrollers with security functions are class I, tamper-resistant microcontrollers class II.

**Can I place a class I product on the market without a notified body?**

Only if you fully apply harmonised standards, common specifications or a European certification scheme (Art. 32(2)). Since no CRA standard has been cited in the Official Journal as of October 2026, the route for class I currently runs through module B+C or H with a notified body.

**What is the difference between module B+C and module H?**

Module B+C examines the product type: a notified body reviews the technical documentation and a type specimen (B), after which you ensure in production that units conform to the type (C). Module H assesses your quality assurance system for design, production and testing; the body monitors the system, not each product.

**Are there notified bodies for the CRA yet?**

The rules on notification (Chapter IV) have applied since 11 June 2026. Member States have been designating bodies since then; the list is maintained in the Commission's NANDO database. Expect scarce capacity and schedule the assessment early.

## Sources

- [Regulation (EU) 2024/2847 (CRA), Art. 32, Annexes III, IV and VIII, EUR-Lex](https://eur-lex.europa.eu/eli/reg/2024/2847/oj)
- [European Commission: Cyber Resilience Act, overview and guidelines](https://digital-strategy.ec.europa.eu/en/policies/cyber-resilience-act)
- [European Commission: CRA Summary (product categories)](https://digital-strategy.ec.europa.eu/en/policies/cra-summary)
- [BSI, the German Federal Office for Information Security: Cyber Resilience Act](https://www.bsi.bund.de/DE/Themen/Unternehmen-und-Organisationen/Informationen-und-Empfehlungen/Cyber_Resilience_Act/cyber_resilience_act_node.html)

Cite as: Blue Panther GmbH (David Kleinz): “CRA Product Classes: Default, Important (Class I and II) and Critical Compared”, panther.blue, as of 26 October 2026, https://panther.blue/en/cra/product-classes/
